Table of Contents
Advertisement
Crib Soother Battery Installation
Battery
Compartment Door
• Locate the battery compart-
ment door on the back of
the crib soother.
• Loosen the screws in the
battery compartment door
with a Phillips screwdriver.
Lift to remove the battery
compartment door.
• Insert three "D" alkaline batteries as indicated inside the
battery compartment.
• Replace the battery compartment door and tighten the screws with a
Phillips screwdriver. Do not over-tighten.
Hint: When battery power is too low, vibrations/sounds may not shut off or
may not function properly as described in these instructions. Remove and replace
all three batteries with three, new "D" (LR20) alkaline batteries.
1.5V x 3
+
"D" (LR20)
Shown Actual Size
7
-
Advertisement
Table of Contents
