Table of Contents
Advertisement
__ 8. Place the card in a static protective bag.
__ 9. Repeat the steps for each card.
Install unit in the rack
Use the following instructions to lift the system unit into the rack and attach it to the shelf.
__ 1. CAUTION:
When the unit is extended, its weight can turn over a rack that is not steady. Before you pull
the unit out of the rack, ensure that a rack stabilizer is attached to the bottom front of the rack.
Do not pull out more than one unit at a time. The rack can turn over if you pull out more than
one unit at a time. (RSFTC224)
__ 2. Install the side covers with lifting bars. Install the two thumbscrews and two slotted retainer
screws that originally were used to attach the system unit covers.
28
Model 825 In Rack Installation Instructions V5R3
Advertisement
Table of Contents
