D-Link DAP-1330 Technical Support Setup Procedure page 3

Technical Support Setup Procedure
Step 11: Click on Save.
Step 12 a) Plug DAP-1330 direct to power outlet.
b) Connect LAN Cable from DAP-1330 to LAN port of the Router.
Step 13: Use computer to connect to the wireless you had setup.
--- END ---
How to reset DAP-1330?
Step 1: Plug DAP-1330 direct to power outlet.
Step 2: Power on DAP-1330 and wait for 1 min.
Step 3: Use a paper clip to press and hold the Reset Button for 30 second.
Step 4: Wait for 2 min for the device to fully power on after reset.
--- END ---
Page | 3