Klarstein Windwaker Eco Manual page 92

EN
Indoor
Wall pipe
92
2 Reserve a certain length of drain hose and power cord for installation when binding
them. When binding to a certain degree, separate the indoor power and then
separate the drain hose.
Connection pipe
Indoor power cord
3 Bind them evenly.
4 The liquid pipe and gas pipe should be bound separately at the end.
Note: The mains power cable and the control cable must not be crossed or wrapped
around each other. The drain hose should be located on the underside.
Step 9: Suspend the Indoor Air Conditioner
1 Put the bound pipes in the wall pipe and then make them pass through the wall
hole.
2 Hang the indoor unit on the wall-mounting frame.
3 Stuff the gap between pipes and wall hole with sealing gum.
4 Fix the wall pipe.
5 Check if the indoor unit is installed firmly and closed to the wall.
Outdoor
Sealing gum
Drain hose
Tape
Lower hook of
wall-mounting frame
Upper hook