Siemens CM 1542-5 Manual page 36

Approvals
CE mark
The SIMATIC NET S7-CPs described in this manual fulfill the requirements and protection
goals of the following EC directives and meet the harmonized European standards (EN) that
have been published for the programmable logic controllers in the official journals of the
European communities:
● 2004/108/EEC "Electromagnetic Compatibility" (EMC Directive)
● 94/9/EC "Equipment and protective systems intended for use in potentially explosive
atmospheres" (Explosion Protection Directive)
The EC Declarations of Conformity are available for the responsible authorities according to
the above-mentioned EC Directive at the following address:
● Siemens Aktiengesellschaft
Industry Automation
Industrielle Kommunikation SIMATIC NET
Postfach 4848
D-90327 Nürnberg
You will find the EC Declaration of Conformity at the following address / under the following
entry ID on the Internet (http://support.automation.siemens.com/WW/view/en/16689636)
EMC directive
The SIMATIC NET S7 CPs listed above are designed for use in an industrial environment.
Field of application
Industry
Explosion Protection Directives
Complying with EN 60079
(electrical apparatus for potentially explosive atmospheres; Type of protection "n")
EN 60079-15, EN 60079-0
II 3 G Ex nA IIC T4 Gc
DEKRA 12 ATEX 0240X
Note
When using (installing) SIMATIC NET products in hazardous area zone 2, make absolutely
sure that the associated conditions are adhered to!
You will find these conditions here:
• In the SIMATIC NET Manual Collection under
"All Documents" > "Use of subassemblies/modules in a Zone 2 Hazardous Area"
36
Requirements
Emission
EN 61000–6–4
Immunity to interference
EN 61000–6–2
Manual, 11/2014, C79000-G8976-C290-02
CM 1542-5