Setting the time
You must set the current time before using the One-time/daily schedule.
Start setting
Skip to previous,
next setting
Setting the schedule
Setting/cancelling the schedule can only be done while POWERbot is docked on the docking station.
Start setting
Setting complete
Cancelling during setup
Cancelling One-time/Daily schedule
When both One-time/
Daily schedule are set
When either One-time
or Daily schedule is set
VR7200_Q_guide_13ge_00780D-00_GE.indb 11
5
Setting time/schedule
Only Auto clean mode can be scheduled.
Select "Hour"
Setting complete
Select "One-time" or
"Daily" schedule
Select "AM/PM"
Setting will be canceled automatically when there's no input for
7 seconds
Press for 3 sec.
English-11
Select "Minute"
Select "AM/PM"
Select "Hour"
Select "Minute"
Skip to previous, next setting
or
Select the schedule
Press for 3 sec.
or
Cancel complete
2019-03-19 오후 5:14:09