Technaxx TX-59+ User Manual page 12

Message
Turn into "Message" to check call history.
If there is no call history, screen displays "No files".
Choose operating command "Play", "Delete" or "Delete All" by pressing "↑/↓",
press OK to turn into operating
If there is no MicroSD card, choose command "Play", the screen displays "No
Video File!" and turns back to Call History menu.
In Play mode press OK to pause and play
When choose Play and if there is no MicroSD card, screen displays "No Video
File!" and turns back to Call History Menu.
In Play mode press OK to pause and play
Can store 10 messages maximal. Message with photo (auto record off) or
video (auto record on). Automatically cover the earliest message. Messages will
be deleted if indoor unit is shutdown or power off.
After operation, press EXIT to turn back to call history operation menu.
NOTE: Unplug the power and reset, all the call history will disappear.
Ring
Enter into Ring menu.
Press MENU key increase and reduce volume 1 (lower volume) & 6 (higher
volume), there are a total of 6 volume levels
to menu.
Choose between 4 standard ringtone or use a customized audio MP3 file.
Copy audio MP3 files (maximum 128kbit) to the MicroSD card and you are able
to select the ringtone from those copied audio mp3 files on the monitor.
Notice: Customized ringtone will only play the first 30 seconds of the MP3 file.
Important: When auto record is activated it is not possible to use customized
ringtone. Than only the 4 standard rintones are available.
Press EXIT key to turn back to standby mode
press EXIT to exit
press EXIT to exit.
press OK key to set up and return
Time
Enter into Time and Date Setup menu.
Press MENU key to choose figure of time or date.
Press ↑/↓ key to adjust the figure
Press OK key to set up and return to Date Setup menu
Press EXIT key to enter into the standby mode
Setup
Enter into Setup menu.
Press ↑/↓ key Select item
Choose: Motion Detection, Backlight time, Unlock duration, Alarm settings,
Language, Pairing, Auto record, Format MicroSD, Restore Setting or Version
Note: Each function is explained below.
Press EXIT key to turn back to standby mode
Motion Detection
Press ↑/↓ key choose "off (disabled)" or "on (enabled)"
connect to outdoor unit you see on display „Connecting...". press OK key to
confirm and exit
Screen displays "success" when it finish
press OK key to confirm
press OK key to