1. Manuals
  2. Brands
  3. Technaxx Manuals
  4. Intercom System
  5. TX-59
  6. User manual

Technaxx TX-59 User Manual

Wireless video door phone
Hide thumbs
Table of Contents

Advertisement

Quick Links

Enlarged version
Technaxx
Wireless Video Door Phone TX-59

Table of Contents

Introduction
Safety Warning & Attentions
Installation of Storage Card
Features
®
Important Hint regarding the User Manuals:
All languages of the user manual are on the CD enclosed. The english
and german version of the user manual is also as printed version
Introduction
This device complies with the requirements of the standards referred to the
Directive R&TTE 1999/5/EC. The Declaration of Conformity you find here:
www.technaxx.de/ (in bar at the bottom "Konformitätserklärung").
Before using the device the first time, read the user manual carefully.
Service phone No. for technical support: 01805 012643 (14 cent/minute from
German fixed-line and 42 cent/minute from mobile networks). Free Email:
support@technaxx.de
If you drill a hole in the wall, please make sure that power cables, electrical cords
and/or pipelines are not damaged. When using the supplied mounting material,
we do not take the liability for a professional installation. You are entirely
responsible to ensure that the mounting material is suitable for the particular
masonry, and that the installation is done properly. When working at higher
altitudes, there is danger of falling! Therefore, use suitable safeguards.
Safety Warning & Attentions
●
Do not place the device on an uneven or unstable table-board to prevent
failure or damage caused by falling.
●
Only the battery and charger designated by the Company can be used on
the device. Application of other products may lead to leakage, overheating,
blowout and fire of the battery.
●
Do not violently strike, shake or toss the device to prevent failure and fire
caused to the wireless video door phone.
●
Do not place the device, battery or charger near or in fire or in a place with
flammable and explosive gas; otherwise, damage and fire of electrical circuit
and other accidents may be caused.
●
Do not place the device in a place with high temperature, high humidity or
large amount of dust; otherwise, product failure may be caused.
●
Keep the device away from children.
enclosed.

Advertisement

Table of Contents
loading

Related Manuals for Technaxx TX-59

Summary of Contents for Technaxx TX-59

  • Page 1: Table Of Contents

    This device complies with the requirements of the standards referred to the Directive R&TTE 1999/5/EC. The Declaration of Conformity you find here: www.technaxx.de/ (in bar at the bottom “Konformitätserklärung”). Introduction Before using the device the first time, read the user manual carefully.
  • Page 2 Attentions for operation of this product ● If the charger is in contact with water or other liquids, disconnect the power supply immediately to prevent overheating, fire, electrical shock and failure of the charger. ● Do not apply force on LCD screen or knock other objects with it, otherwise, breakage and damage of LCD panel and seepage of crystalline liquid will be ●...

  • Page 3: Product Overview

    14. Multifunction holder: wall-hung type or table type provided. ● Do not have the metal parts (specially configured interfaces of charger and data line excluded) in contact with charger interface to avoid short circuit. 15. Multi machine extended function: support two outdoor units and three indoor monitor at most.

  • Page 4: Technical Specifications

    Technical specifications Product Diagram Outdoor unit Power Specific lithium battery 3400mAh Consumption 400mA Outline dimension 134 x 74 x 31 mm Weight 138 g Environmental temperature –10°C ~ +50°C Waterproof grade IP55 Placement Hang on out wall Outdoor Surface material ABS &...

  • Page 5: Installation Guide

    Indoor monitor “EXIT / monitor” key: work as monitor key for standby mode * as exit key for MENU 5. “MENU / unlock” key: work as unlock key when communicating with outdoor unit * as right moving key for MENU. 6.

  • Page 6: Installation Steps & Battery Installation

    Installation Steps & Battery Installation 1. Drill a hole refer to the dimension, put the screw rubber plug in, then fix the rainproof cover on the wall by screws. 2. Connect the charging line according to the wiring diagram(the hole for wire getting through suggested 16~30mm), if charging line comes from indoor, Unlocking Setting lead the charging line pass through the hole, if charging line comes from...

  • Page 7: Storage Card Introduction

    Wall holder Installation Installation of MicroSD memory card 1. Insert the storage card in the way as shown in the diagram until you hear a clicking sound. 2. Improper insertion of storage card may cause system failure, please confirm the inserting direction of the card. 3.

  • Page 8: Functions And Applications

    Functions and Applications Outdoor Unit Call Indoor Monitor In standby time mode, press “Door bell key” to call, the blue LED of the outdoor unit lights up with a sound of “Du Du”. Blue LED of indoor monitor lights up, the Outdoor Unit Starting Up screen shows image and the unit rings for Max.

  • Page 9: Indoor Monitor View The Camera

    ■ End: in monitor mode -》press “OK” key -》 end monitor and turn back to Indoor Monitor View the Camera standby mode. Note: in monitor mode, red LED lights up, in intercom mode, red LED shuts In standby mode, press “ ”...

  • Page 10: Night-Vision

    Night-vision Indoor Monitor Menus With night-vision function, even under the environment of extremely poor visibility, ■ In standby mode, press “MENE” to turn into main menu. the outdoor unit can activate infrared lamps and recognize clearly objects or ■ Choose submenu by pressing “↑/↓”and “MENU”, press “Ok” to confirm. people within the distance of 1.5meter (the best focus of this product is 0.8 meter).
  • Page 11 ■ Choose operating command “View”, “Set As Background”, “Delete”, “Delete All” or “Back” by pressing “↑/↓”-》press “OK” to turn into operating. Detection ■ In View mode -》 press “↑” to view the last photo, press “↓” to view the next photo Enter into Sense setup menu.
  • Page 12 ■ If two units match successfully in 16 seconds, indoor monitor displays ■ The added outdoor unit(finished clear code), under the standby mode-》 “Success”, outdoor unit makes “Beep- Beep-Beep” sounds, as the first keep pressing ”call” key for 6 seconds until two “beep” sounds(“beep” once outdoor unit about 3 seconds) -》loosen the key to enter into Join the network mode.
  • Page 13 ■ Press “↑/↓”key -》choose “Leave the network” -》 press “OK” key, enter into clear code menu. Time ■ Press “↑/↓”key -》choose “Yes” (press “Quit” to exit if you don’t want to clear anything ), system will return to code menu automatically after code clear Enter into Time and Date Setup menu.

  • Page 14: Battery And Charge

    Battery and Charge Setup ● Under the connection mode, when the outdoor unit is at low power, the Enter into Setup menu. indoor monitor will show “out low power” to remind you to charge for outdoor ■ Press“↑/↓”key -》Select item -》press ”OK” key to confirm unit.

  • Page 15: General Faults And Solutions

    Code match failed Clear code, and re-match code a battery, wipe the battery case with a soft cloth dry. Distributor: Technaxx Deutschland GmbH & Co.KG, Indoor monitor cannot call Indoor monitor Kruppstr. 105, 60388 Frankfurt a.M., Germany Clear code, and re-match code...

Table of Contents