Turning On And Projecting - Epson EMP-S4 Quick Start Manual

Turning on and Projecting

Slide the A/V mute slide to open it.
Do not look directly
into the lens.
Turn on the power.
Control Panel
Reading the Indicators
Orange Standby
Press
* In this mode, you can unplug the
power cable.
Green Warming up
Wait for a short time (about 30
seconds).
In this mode pressing
Green Projecting
22
Remote Control
Lit Flashing
to start projecting.
has no effect.
(Accessory
Power Cable)
• No Image is Projected
• Adjusting Focus
• Correcting Keystone Distortion
• When using the "Direct Power
• When using above an altitude of
Connect the power cable.
Turn on the
power supply for
the connected
equipment.
p.24
ON" feature, the power turns
on when the power cable is
connected.
about 1500 m, make sure you
set the "High Altitude Mode" to
"On".
User's Guide "Extended
Menu"
p.23
p.24