Table of Contents
Advertisement
Q u i c k
Introduction
The CRD1500-4000E 4-slot Ethernet cradle enables up to 4 SPT
1500 terminals to simultaneously communicate with their
associated host computers connected to a local area network. Up
to 4 terminals may be seated in the cradle. Additionally, up to 7
CRD1500-4000S serial cradles may be daisy-chained with this
unit, providing a total of 32 slots available for host
communications.
Theory of Operation
Palm HotSync Manager software supports one HotSync at a time
between a single terminal and a single PC. If the application
requires multiple devices to communicate simultaneously with a
single host, then synchronization server software such as Scout
MTS
or AVANTGO
TM
purchased from Symbol. Contact your Symbol sales
representative for information.
About This Guide
This guide provides instruction on the setup, use and maintenance
of the CRD1500-4000E 4-slot cradle. Additionally it describes
steps to set up an SPT 1500 terminal for use with the CRD1500-
4000E, and steps to update the standard SPT 1500 Desktop
Software to permit synchronization over an Ethernet network.
Specifically, the following topics are discussed:
•
Set Up on page 2
•
Software Configuration on page 8
•
The HotSync Process on page 12
•
Indicator Lights on page 14
•
Troubleshooting on page 15
•
Regulatory Information on page 16
•
Service Information on
R e f e r e n c e
is required. This software may be
TM
backcover.
1
Advertisement
Table of Contents
