Epson Stylus Photo PX800FW Basic Operation Manual page 8

Adjusting the Angle of the Control Panel
Raise manually.
Restarting Automatically After a Power Failure
If power failure occurs while printer
is in fax standby mode or printing, it
restarts automatically and then beeps.

Press Unlock to lower.
c
Do not put your hand inside the
printer until the print head stops
moving.
c
Precautions on Using the Touch Panel
Press the touch panel gently with the tip of your finger. Do not press too
O
hard or tap it with your nails.
Do not operate using sharp or pointed objects such as ball point pens,
O
sharp pencils, and so on.
The cover of the touch panel is made of glass and could break if it
O
receives a heavy impact.
Contact your dealer if the glass chips or cracks, and do not touch or
attempt to remove the broken glass.
Q
Restart stops if any control panel
buttons are pressed before the
LCD turns on.
Q
Depending on the circumstances
before the power failure, it may
not restart. Restart by pressing
P On.