Summary of Contents for Graco FinishPro CompPack Series
Page 1
Repair FinishPro CompPack Compressor 313440E - For portable spray applications of fine finish coatings - 120 Vac Model: 256850 240 Vac Model: 256854, 25A445 Maximum Working Pressure: 10 psi (0,07 MPa, 0.7 bar Important Safety Instructions Read all warnings and instructions in the sprayer manual, 313406.
Page 2
Setup Setup 4. Install main filter (21), pre-filter (20), filter retainer (17) and hose wrap (35) with four screws (105). CompPack Installation Spray Gun with Optional Remote Cup For references (1) - (99), see Parts, manual 313406. For reference numbers(101) - (199) see Parts, page 7. 1.
Page 3
Setup Pressure Relief Procedure 6. Connect fluid supply hose (C) from remote cup fluid outlet to spray gun fluid inlet. WARNING The optional remote cup remains pressurized until pressure is manually relieved. To reduce ti13151a the risk of serious injury from pressurized fluid or accidental spray from gun, always relieve pressure in the remote cup before loosening or removing the cover.
Page 4
Repair Repair Compressor Removal 4. Disconnect three spade connectors (B) from back of inlet plug (102). For references (1) - (99), see Parts, manual 313406. For reference numbers(101) - (199) see Parts, page 7. 5. Remove three screws (104) from compressor box (112) and remove compressor (111).
Parts Drawing Parts Drawing Models: 256850, 256854 ti12908b Parts List Models: 256850 256854 Part Description 15Y858 KIT, compressor box HVLP, 120V 15Y859 KIT, compressor box HVLP, 240V 257098 KIT CUP, 1 qt complete 240488 COMPRESSOR, hose 256959 STRAP, remote, cup 313440E...
Page 7
Parts Drawing Parts Drawing Models: 25A445 ti27709a Parts List Models: 25A445 Part Description 15Y859 KIT, compressor 24Y630 GUN, HVLP, no cup 240475 HOSE, fluid 25A433 KIT, repair, 1 qt cup 17J918 HOSE, air 17H702 HOSE, air 257161 HOSE, whip 114958 STRAP, tie 240065 VALVE, air control M70402 FITTING, female, Q.D.
With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.