Room Temperature - Philips AVENT SCD731 User Manual

Room temperature

2 Select 'Set Timer' in the feed timer submenu. Press OK to start setting the
timer.
3 Set the hour and the minutes and press OK to confirm.
4 To start the feed timer, select 'xx:xx Start' in the feed timer submenu.
Press OK to confirm. The timer symbol appears on the display and the
timer starts counting down.
5 When the timer has reached 00:00, the feed timer alert goes off, the
timer symbol starts flashing on the display and the message 'TIMER END'
scrolls across the display.
6 To stop the timer, select 'Stop & Reset' in the feed timer submenu and
press OK to confirm.
Setting the feed timer repeat
1 To make the feed timer go off after the same set time, select 'Timer
repeat' in the feed timer submenu after you have set the timer. Press OK
to confirm.
2 Choose 'Repeat ON' or 'Repeat OFF' and press OK to confirm. The timer
repeat symbol appears on the display.
3 If 'Repeat ON' is set, the feed timer starts counting down again after you
stop the alert.
Setting a feed timer alert
1 To set an alert, select 'Timer Alert' in the feed timer submenu. Press OK to
confirm.
2 Choose one of the alert options. The options available are sound only,
sound and vibration and vibration only.
3 Press any key to stop the alert or the alert stops automatically after 2
minutes.
4 To stop the timer, select 'Stop & Reset' in the feed timer submenu and
press OK to confirm.
A baby sleeps comfortably at a temperature between 16°C/61°F and
20°C/68°F. You can set a minimum and a maximum temperature range and
an alert.
1 To open the temperature submenu, select 'Temperature' in the menu.
Press OK to confirm.
2 Select 'Temp Range' in the temperature submenu and press OK to
confirm.
3 Use the + and - buttons to set the minimum temperature range between
10°C/50°F and 19°C/66°F and the maximum temperature range between
22°C/72°F and 37°C/99°F. Press OK to confirm.
4 Select 'Alert' in the temperature submenu. Press OK to confirm.
English
17