HMM Diagnostics ANT smartLAB combo User Manual page 29

8. Tighten the cable ties to the speed sensor when in correct position and cut of
the loose ends if neccessary.
Notice: Placement of speed sensor may depend upon spoke magnet placement, the
bicycle type and/or drive chain type.
Notice: Speed sensor or spoke magnet placed on bicycles with triple chainring
cranksets and/or S-bend chainstay may require to be adjusted in order to bring both
parts within correct proximity.
Be carefull not to damage the covered wire between the connect sensors
Periodically check the cable ties and the spoke screw to make sure that they
are secure
29