Table of Contents
Advertisement
Notice: Placement of magnet on crank arm may depend upon cadence sensor place-
ment, the bicycle type and/or drive chain type.
Notice: Candence sensors or magnet placed on bicycles with triple chainring crank-
sets and/or S-bend chainstay may require to be shimmed in order to get both pieces
within correct proximity.
5.
Now the speed sensor will be mounted. Playe the
rubber pad benieth the speed sensor and mount it
loosly to the chainstay with the cable ties.
6.
Remove the screw from the spoke magnet and
place it on a spoke of the rear wheel. Please con-
sider that the magnet passes by the sensor in the
center within 10mm when turning the wheel.
7.
Tighten the screw thoroughly back onto the mag-
net to connect it to the spoke. Make sure that the
magnet stayes on level with the speed sensor.
28
Advertisement
Chapters
Table of Contents
