Advertisement
5.2.
REPLACING OUTER PROTECTIVE COVER LENS
5.2.1.
Remove the shade cartridge (refer section 5.1)
5.2.2.
Push the lens into the helmet and renew.
5.3.
REPLACING INNER PROTECTIVE COVER LENS
5.3.1.
From inside the helmet, use finger recess in the top edge of the filter to lever up the lens and replace.
5.4.
CLEANING
5.4.1.
Clean helmet by wiping with a soft cloth. Clean cartridge surfaces regularly. Do not use solvent based cleaners.
5.4.2.
Clean sensors and solar cells with methylated spirit using a clean cloth and wipe dry with a lint-free cloth.
6. TROUBLESHOOTING
PROBLEM
CAUSE
Irregular darkening or
Irregular darkening or
The headband may have been unevenly set on the two
The headband may have been unevenly set on the two
dimming.
dimming.
sides of the helmet (unequal distances from the eyes to
sides of the helmet (unequal distances from the eyes to
the shade cartridge).
the shade cartridge).
Shade cartridge does
Shade cartridge does
The sensors are soiled or obstructed.
The sensors are soiled or obstructed.
not darken or flickers.
not darken or flickers.
Front cover lens oiled or damaged.
Front cover lens oiled or damaged.
Welding current too low.
Welding current too low.
Poor vision.
Poor vision.
Operative lenses and/or shade cartridge soiled.
Operative lenses and/or shade cartridge soiled.
Insufficient background lighting.
Insufficient background lighting.
Slow response.
Slow response.
Operating temperature too low.
Operating temperature too low.
Welding helmet slips.
Welding helmet slips.
Headband adjustments incorrect.
Headband adjustments incorrect.
7. SHADE GUIDE
WELDING
0.5
2.5
10
PROCESS
1.0
5.0
Covered Electrode
MIG Plate Welding
MIG Sheet
Welding
TIG
MAG
Arc Gouging
Plasma Cutting
Plasma Welding
4
5
6
4
9
13
Light state
Lightest dark
Darkest
scale no.
state scale
state scale
no.
no.
Parts support is available for this product. Please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
CURRENT (AMPERES)
20
40
60
125
15
30
50
100
150
Shade 9
S10
Shade 11
Shade 10
Shade 11
Shade 10
Shade 11
Shade 9
S10
Shade 11
S12
Shade 10
S11
S12
Shade 10
Shade 11
7
8
9
10
11
S12
Meaning of the markings on the filter:
SEALEY
1
Manufacturers
Optical class.
identification.
01284 703534
Original Language Version
SOLUTION
Readjust the distance of the
Readjust the distance of the
shade cartridge.
shade cartridge.
Clean.
Clean.
Clean or replace.
Clean or replace.
Adjust weld amps.
Adjust weld amps.
Check, clean or replace.
Check, clean or replace.
Adjust light.
Adjust light.
Do not use at temperatures
Do not use at temperatures
below -10 o C (14 o F).
below -10 o C (14 o F).
Refer to section 4.
Refer to section 4.
175
225
275
350
450
200
250
300
400
Shade 12
Shade 13
Shade 12
Shade 13
Shade 12
S13
S14
Shade 13
Shade 14
Shade 13
S14
S11
S12
S13
S14
Shade 12
Shade 13
Shade 13
Shade 14
3
1
Diffusion of
Variation in
Number of
light class.
luminence
the applied
transmittance
standard.
class.
sales@sealey.co.uk
500
S14
S14
S15
S15
S15
S15
379
www.sealey.co.uk
S01001.V2 | Issue:3 (H,F) 10/04/19
Advertisement
