Installing The Mount - Bresser 9686100 Instruction Manual

3 Recording time remain-
ing until storage capacity
is reached
5 Record Audio activated
or deactivated (crossed
out)
7 Battery charge capacity 8
9 Date
11 WDR (Wide Dynamic
Range)
13 Motion detection mode
Photo mode
15 Photo symbol
17 Image stabilisation
19 Image resolution
21 Sensor sensitivity
23 Exposure

8 Installing the mount

1. The mounting is already pre-assembled.
2. Ensure the suction pad on the mount and the intended
mounting surface are free from any dust, dirt or grease.
NOTICE! Position the camera so that the camera and
the cable do not restrict the field of vision when
driving.
3. Press the fixing lever down towards the camera.
4. Lightly moisten the suction pad and press against the
chosen surface.
4 Video resolution
6 microSD card inserted
Time
10 Write protected record-
ing
12 Exposure settings
14 Loop recording and dis-
play time
16 Timer
18 Shots remaining
20 Image quality
22 White balance
35 / 92