Displays; Installing The Mount - Bresser 9686100 Instruction Manual

In-car camera (A), mount (B), USB cable (C), in-car charger (D), instruction manual

7 Displays

1
2
14
13
12
11
10
Illustration 2: Camera displays
Video mode
1 Video symbol
3 Recording time remaining until storage ca-
pacity is reached
5 Record Audio activated or deactivated
(crossed out)
7 Battery charge capacity
9 Date
11 WDR (Wide Dynamic Range)
13 Motion detection mode
Photo mode
15 Photo symbol
17 Image stabilisation
19 Image resolution
21 Sensor sensitivity
23 Exposure

8 Installing the mount

1. The mounting is already pre-assembled.
2. Ensure the suction pad on the mount and the intended mounting surface are free from any dust,
dirt or grease.
NOTICE! Position the camera so that the camera and the cable do not restrict the field of vis-
ion when driving.
3. Press the fixing lever down towards the camera.
4. Lightly moisten the suction pad and press against the chosen surface.
5. Push the lever back up.
6. Loosen the locking ring by turning anti-clockwise and rotate the camera into the desired position.
20 / 52
9
8
15
3
4 23
22
5
6
21
7
2 Record Video activated (recording sym-
bol)
4 Video resolution
6 microSD card inserted
8 Time
10 Write protected recording
12 Exposure settings
14 Loop recording and display time
16 Timer
18 Shots remaining
20 Image quality
22 White balance
17
16
18
19
20
6
7