Settings Menus - Bresser 9686100 Instruction Manual

Full hd dashcam
Hide thumbs Also See for 9686100:
Table of Contents

Advertisement

Available languages

Available languages

11 Settings menus

1.
2.
3.
4.
5.
6.
7.
Menu item
Resolution
Loop Recording
38 / 92
In video record mode, photo capture mode or playback
mode, press the MENU button to access the settings
menu for each mode. The corresponding menu items
are displayed depending on the selected mode.
Navigate through the menu items using the UP or
DOWN button.
Press the OK button to call up the options for the partic-
ular menu item.
Choose the required setting using the UP or DOWN
button (see the table below).
Press the OK button to confirm the selected setting.
Press the MENU button again to enter the settings
menu for the basic camera settings.
Repeat steps 1 to 5 to adjust the basic settings or press
the MENU button again to return to video recording,
photo shooting or playback mode.
NOTICE! To exit a menu item without making any
changes, exit the entire menu by pressing the MENU
button then call up the menu again.
Adjustment (s)
Set video resolution (1080FHD
1920x1080, 720P 1280x720,
WVGA 848x480 or VGA 640x480).
Enable automatic recording (1, 3,
or 5 minutes) or disable (OFF). If
active, non-write-protected record-
ings will be overwritten when the
storage medium is full. If the func-

Advertisement

Table of Contents
loading

Table of Contents