Philips Satinelle Ice HP6491 Instructions For Use Manual page 9

Make sure both the epilating discs and the skin cooler are in proper
contact with the skin.Press the appliance lightly onto the skin.
If you are not completely satisfied with the epilation result, try
moving the epilator more slowly over your skin.
7 Use the tab on the bottom end of the appliance to remove the
appliance from the skin cooler (fig. 6).
Epilating without skin cooler
If you do not want to use the skin cooler, for instance because
you have grown accustomed to the sensation of epilation, you can
also use the appliance without the skin cooler.
Make sure that you place the epilator perpendicularly onto your
skin and that you move it against the direction of hair growth.
Using the exfoliating body puff
Use the exfoliating body puff in the shower.
Regular massages with the puff may help to prevent ingrown hairs.
Do not use the puff immediately before or after epilation.
Cleaning and maintenance
Never rinse the adapter or the appliance itself with water.
Do not use any corrosive detergents, scouring pads or cloths, petrol,
acetone etc. to clean the appliance.
1 Make sure the appliance is switched off and unplugged.
2 Remove the skin cooler from the appliance and slide the
insulating sleeve off the skin cooler.
3 Clean the pivoting cooling head of the skin cooler with a brush
or moist cloth after each use (fig. 7).
Make sure the outside of the skin cooler is completely dry before
freezing it again.
ENGLISH
9