Universal Mount - LaserLiner SensoMaster M350 Operating Instructions Manual

Accurancy
5
Set the accuracy
by pressing button 10.
Switch between the three
accuracies, coarse, medium
or fine, by repeatedly pressing
the button.
Switch units of measurement
6
Select centimetres (cm) or millimetres (mm) as the unit of measurement
by briefly pressing button 9.
Backlighting
7
The backlighting is switched ON/OFF by pressing and holding button (9).
Loudspeaker beep
8
Toggle button 4 to set the volume to loud, quiet or off.
One beep is emitted at the selected volume when changed.

Universal mount

The laser receiver can be installed on levelling
staffs with the aid of the universal mount.
The Flexi measuring staff is always recommended
when measuring from floor heights. It also allows
you to determine heights directly without any
need for calculation.
SensoMaster M350
Coarse Medium Fine
13
EN