S&P CADB-N-D Installation Manual page 35

7. . VERTICAL CONFIGURATIONS
7. .1. CADB/CADT-N-D 05 / 08 / 12 / 18 / 23 / 30 / 45 / 55 / 80 (B-A)V MODELS
Models without an electric heater, but with the possibility of installing a water coil, for post-heating in remote installation configuration, with
a double insulation wall and without by-pass.
The airflows indicated in these configurations can be changed, according to the installation.
The installer must only take into account the correct connection of the evacuation system for water produced by condensation (See section 7.3.3).
From the factory configuration, we can configure the appliance, taking into account that we can turn it , thus modifying the position of the support feet,
and at the same time, it will also be necessary to modify the position of the "water collection" tray, according to the chosen configuration.
CADB/CADT-N-D 05 / 08 / 12 / 18 / 23 / 30 / 45 / 55 /
80 BV MODELS
7. .2. CADB/CADT-N-D 05 / 08 / 12 / 18 / 23 / 30 / 45 / 55 / 80 (B-A-E)V (BP) MODELS
Models without an electric heater, but with the possibility of installing a water coil, for post-heating in remote installation configuration, with
a double insulation wall and with a by-pass.
The airflows indicated in these configurations CANNOT be changed, according to the installation.
CADB/CADT-N-D 05 / 08 / 12 / 18 / 23 / 30 / 45 / 55 /
80 AV(BP) MODELS
AV (By-Pass)
CADB/CADT-N-D 05 / 08 / 12 / 18 / 23 / 30 / 45 / 55 /
80 EV(BP) MODELS
EV (By-Pass)
BV
CADB/CADT-N-D 05 / 08 / 12 / 18 / 23 / 30 / 45 / 55 /
80 AV MODELS
CADB/CADT-N-D 05 / 08 / 12 / 18 / 23 / 30 / 45 / 55 /
80 BV(BP) MODELS
35
AV
BV (By-Pass)