Advertisement
Available languages
Available languages
2.
Insert the hexagon screw into its corresponding hole, as illustrated.
3.
Align and insert the half-size mSATA SSD into its upper slot inside the VivoMini. Refer to
the illustration for its location.
4.
Gently push down the mSATA SSD on top of the screw hole and fasten it using one of
the 3mm round screw. Refer to the illustration for the location of the screw hole.
5.
Follow steps 7-9 on pages 3-4 under the Installing or upgrading memory modules section
of this guide to replace the bottom cover back on your VivoMini.
8
Advertisement
