Advertisement
Available languages
Available languages
6.
Align and insert the memory module into the slot (A) and press it down (B) until it is
securely seated in place. Repeat the same steps to install the other memory module.
IMPORTANT! Always install into the lower slot first.
7.
Remove the screw you previously attached on the bottom cover.
8.
Place the cover back on the bottom side of your VivoMini. Note that the cover can only
be inserted in one direction. Refer to the following illustration and note to ensure that
the cover is securely fitted on the bottom side of the VivoMini.
IMPORTANT! The rating
label area (A) and the
power button's location
(B) must be oriented as
shown.
3
Advertisement
