Page 1
PRINCETON ELITE 4 DRAWER CHEST By Sorelle - A Division of C&T International, Inc. 46 Whelan Road, East Rutherford, NJ 07073 U.S.A. Tel, 201/531 1919 Fax, 201/531 1920 www.sorellefurniture.com WEBSITE: =12pcs Bolts 1/4”x 45mm Machined screw 20mm 8pcs Front Top Bar...
Page 2
1 Front Top Bar 2 Front Middle Bar 1 Front Middle Bar 2 Back Dwon Bar 1 Front Down Bar 1 Back Top Bar 2 Back Panel...
Page 4
If you have missing parts or questions... If a part is missing or you have questions, call us. DO NOT return product or parts to store from where it was purchased before calling us at: (201)-531-1919 Our service is fast, free and easier than returning the product.
Page 5
Use 6pcs Bolts ( a ) attach the Bar ( D&F&E&G&H&I ) to attach the Left Side Panel ( B ). As shown in Figure 1. Figure 2 Use 6pcs Bolts ( a ) attach the Bar ( D&F&E&G&H&I ) to attach the Right Side Panel ( C ).
Page 6
Step 4 Attach the Back Panel(N) with 40pcs wood screw( d ), As shown in Figure 4. Figure 4 Step 5 W orking on a padded fl at surface, attach Drawer Sides Panel (L & M) to Drawer Back Panel(N) with 4pcs Wood screw( c ) and 2 pcs Wood Dowel(n).
Page 7
Step 6 Insert 1 pc Wood Dowel (n) into the hole of Side Panels (M&L). As shown in Figure 6. Figure 6 Step 7 Secure both sides of Drawer Front ( K ) to drawer assembly with 4pcs wood screw( c ). Figure 7 As shown in Check all screws for tightness.
Page 8
Step 8 Attach Matel Connector A (i)and Figure 8 Matel Connector B ( j ). Figure 8 Insert 2pcs 1” Bolt(e) through the Drawer. Figure 9 As shown in Repeat steps 5 through 9 to assemble Figure 9 all 4 drawers. Step 10 Figure 10 Figure 10...
Need help?
Do you have a question about the Princeton Elite and is the answer not in the manual?
Questions and answers