Product Description; Installation; Use And Operation - Klarstein 10003444 Manual

1 Control Panel
2 Glas Door
3 Door Handle
4 Storage Shelf
5 Adjustable Feet
• When you receive the cabinet, make sure when you unpack it there is no flaws in its external ap-
pearance (from shocks, deformation, etc.)
• Open the door and check all interior fittings and supplied items if are all complete (shelves, inst-
ruction, control panel, etc.) Please install it according to the following points if the shelves or shelf
brackets fall off during transit.
Carry your wine cabinet to the final place to see if there is no problem with it after checking. Observe
the following when placed:
• Ensure that there is a minimum of 5cm between your wine cabinet and the left & right wall; leaving
a space of at least 8cm between the back cabinet and the wall.
• Position the wine cabinet on a flat level surface, if not, adjust the feet of wine cabinet to keep level.
• Away from sources of heat and high humidity areas (laundry room and bathroom, etc).
• Do not tilt it at an angle of more than 45° when move the cabinet. Allow a minimum 10-minute
interval between transit and re-starting.
• Make sure the ventilation is free if you wish to install your cabinet into a worktable, otherwise, it
will reduce the effect of usage.
Temperature Setting
The temperature setting ranges are 5-12 ºC (41-54 ºF) for the upper zone and 12-22 ºC (54-72ºF)
for the bottom zone.

Product Description

Installation

Use and Operation

8