Install Sim Card And Battery; Pin Code - easyteck T710 Manual

Install the SIM card and battery
SIM card with your private information. Holds your phone number and PIN (perso-
nal identification number), PIN2, PUK (PIN unlock password), PUK2 (PIN2 unlock
password), contact number and the network information data and information
data, and so on.
Note:
1. Turn off the phone and in a few seconds, and then pull out or insert SIM card,
do not dial out in the process of cell phone use normally or insert SIM card.
2. Please be careful operation SIM card, friction or bent easy to damage the SIM
card.
Installation steps
Steps as follows:
1. Turn off the phone and remove the battery.
2. Select SIM card place holder. According to the direction of the slot icon to push
38
the SIM/USIM card carefully into the slot of a SIM gets stuck.
3. Make sure that a SIM card after making the proper installation and battery
assembly, close the back cover.
Use the password
Your mobile phone and SIM CARDS have many passwords. When entering the
following mention any password, enter the correct password and press the virtual
keyboard keys.If an error occurred when the input, please first press the virtual
keyboard clear button to delete the incorrect input, and then input the correct
number.Can use a function table "security - > set SIM card lock/screen lock" to
modify or open the PIN number and mobile phone password.

* PIN code

PIN (personal identification number, 4 to 8 bits) used to prevent your SIM card has
been unauthorized use.PIN usually SIM card provided by the network operator.
If launched the PIN test function, each time will be asked to input PIN when the
39