On/Off - easyteck T710 Manual

2. When the battery is insufficient, the screen shows "please connect your charger.
3. When the battery is charging, charging status animation, stop charging anima-
tion and the lock screen interface display "is full of" charging is complete.
4. For other related parameters of battery and charger, please see the material
object.
Use the USB charging
USB connection at one end to the computer, mobile phone at the bottom of the
slot at the other end, after the connection is successful, the phone screen at the
top of the battery icon in the status until full of electricity grid number change.
Use the travel charger
Travel charger via mobile phone to recharge the battery.To recharge the battery,
the battery into the mobile:
1. The USB end of the cable connected to the charger USB interface.
42
2. The cable mobile phones plug end insert at the bottom of the interface.
3. Insert the plug of travel charger suitable mains socket.
4. When charging, the battery icon in the state of power grid number change until a
full charge.
5. At the end of charging, the battery icon changes to stop.
Note: if the low battery voltage to a phone boot, the charging, need a long time the
battery icon will scroll.
Warning:
- Must ensure that local standard voltage and power with your travel charger match
the rated voltage and power.
- Please do not will use the mobile phone specified charger to charge the mobile
phone.

ON/OFF

1. Hold down the power button is a bit long time, open the phone, successfully
43