Hdmi Mode - Capturing Images Without A Computer Or Without A Wireless Device - Leica IC90 E User Manual

HDMI Mode – Capturing Images Without a Computer or Without a Wireless
Device
In order to use this mode, you need a
SD card with enough free memory. The
SC card is part of the standalone kit. If the SD
card is full, you will not be able to capture any
images – a corresponding message will be
shown.
Attaching the power cable
1. Be sure the camera is connected to a power
source – see power source section on
page 43.
2. Click the switch labelled ON/OFF into the
ON position.
Leica IC90 E User Manual
3. The status light will blink green. Wait until
the status light stopped flashing and one of
the mode button's is also green. This may
take approximately 30 seconds.
Get Set!
4. If a mode other than HDMI is lit green, press
the mode switch and wait until both the
status LED and the LED next to the HDMI
mode panel stop flashing.
22