Installation; Attaching The Stand - Samsung S R35 Series User Manual

Installation

Attaching the Stand

― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
― The exterior may differ depending on the product.
1
Insert the stand neck into the stand base in the
direction shown in the figure.
5
Fasten the screws at the bottom of the stand neck.
2
Check that the stand neck is firmly connected.
- Caution
Do not press down on the monitor. There is a risk of
damaging the monitor.
3
Tightly fasten the connecting screw at the bottom
of the stand base.
4
Place the protective Styrofoam (cushion) included in
the package on the floor and place the product facing
down on the Styrofoam, as shown in the image.
If Styrofoam is unavailable, use a thick sitting mat.
Hold the back of the product as shown in the figure.
Push the assembled stand into the main body in the
direction of the arrow as shown in the figure.
18