Nortel 8300 Series Installation And Commissioning Manual page 6

6 Introduction
Getting help over the phone from a Nortel Solutions Center
If you do not find the information you require on the Nortel Technical Support
web site, and you have a Nortel support contract, you can also get help over
the phone from a Nortel Solutions Center.
In North America, call 1-800-4NORTEL (1-800-466-7835).
Outside North America, go to the following web site to obtain the phone
number for your region:
www.nortel.com/callus
Getting help from a specialist by using an Express Routing Code
To access some Nortel Technical Solutions Centers, you can use an Express
Routing Code (ERC) to quickly route your call to a specialist in your Nortel
product or service. To locate the ERC for your product or service, go to:
www.nortel.com/erc
Getting help through a Nortel distributor or reseller
If you purchased a service contract for your Nortel product from a distributor
or authorized reseller, contact the technical support staff for that distributor
or reseller.
Precautions
For your safety, review the following personal safety warnings before
working with the Ethernet Routing Switch 8300 Series.
Copyright © 2005-2006, Nortel Networks
.
DANGER
Risk of injury by electric shock
Use only power cords that have a grounding path. Without a
proper ground, a person who touches the switch is in danger of
receiving an electrical shock. Lack of a grounding path to the
switch may result in excessive emissions.
WARNING
Risk of injury by fan blades
When removing the fan module, do not put your hands into the
opening because there are spinning fan blades in the adjacent fan
modules. There is also a risk of electric shock from the electrical
connector at the rear of the slot.
Nortel Networks Ethernet Routing Switch 8300
Installation and Commissioning — Quick Start
NN46200-100 02.01 Standard
3.0 6 September 2006
Nortel Networks Confidential