How To Use - Panasonic EW-1311 Operating Instructions Manual

2
2
Disconnect the power plug after charging
is completed.
(for safety and to reduce energy usage)
• The battery performance will not be affected even
if it is charged for more than 15 hours.
Notes
• When using the appliance for the first time or if it has
not been used for more than half a year, the
charging indicator may not light up for several
minutes after charging starts or the operating time
may become shorter. In such cases, charge the
battery for 23 hours or more.
• Recommended ambient temperature for charging is
0 °C – 35 °C. Battery performance may decrease
outside of the recommended temperature.

How to use

1
1
Attach the nozzle firmly onto
the main unit.
EW1311_EU.indb 11
2
2
Open the water tank cap, hold
the main unit so it is level, and
fill the tank with water.
• Always use new tap water or
lukewarm water.
• If the water feels cold, use lukewarm
water with a temperature of 40 °C or
less.
3
3
Close the water tank cap,
making sure it locks in place.
4
4
Press the mode switch and select the
desired water jet mode.
• The mode indicator will glow the previously
selected mode. If the appliance is not used for
more than 30 days, or after the appliance has
been fully charged from its fully discharged state,
the mode is initialized to AIR IN (SOFT). (When
the battery is drained, the mode will be reset but
this is not a fault.)
• If you want to use a different mode, press the
mode switch until it changes to the desired setting.
Pressing the mode switch will change the mode
from AIR IN (SOFT) to AIR IN (REGULAR) to JET.
11
2018/11/14 13:02:24