Celsius CELPH100 Operating Instructions Manual page 5

Before using this appliance, it must either be wall mounted or have the castor plates and castors fitted.
The screw pack to attach the feet to your appliance will be taped to either one of the feet for your
appliance, or taped to the plug.
PLEASE NOTE: The screws supplied are one way screws so once screwed in they cannot be unscrewed
again.
ASSEMBLY FOR FREESTANDING
Each castor plate supplied with this heater (supplied separately in the carton) requires 3 screws
to attach them securely to the heater. Holes are pre-drilled in the base of the heater.
The castor plates come with 3 pre-drilled holes.
Carefully turn the Main Body upside-down on a scratch-free and stable surface. Be careful to
prevent damage to the cosmetic finish or your floor surfacing.
Place the plastic lugs on the castor plate into the holes on the bottom of the heater and secure
them in position with small screws provided.
Castor plate showing lugs
Securing Screw (3 per castor plate)
Note:2 screws for each castor plate are
already screwed into the bottom of
heater and need to be removed to put
plate on.
Castor plate securely positioned
Assembly
Lugs positioned in bottom of heater
Screws pre-inserted