Download Print this page

Profi-pumpe Pool-Star 1100-1 Operating Instructions Manual page 3

Advertisement

Available languages

Available languages

4 English
5.1 InstallatIon
230 Volt
A fi xed connection
must be provided
by the customer
from a power of
2000 watts on.
400 Volt
A fi xed connection
must be provided
by the customer
from a power of
2000 watts on.
5.2 step hose adapter asseMbly
Our multi-adapters allow the use of our POOL-STAR pool pumps under different installation si-
tuations. The hose connection sizes fi t exactly to the respective models of POOL-STAR pumps.
POOL-STAR 370W (230V)
POOL-STAR 550W (230V)
POOL-STAR 750W (230V)
POOL-STAR 1100W (230V)
1: Ø 25mm
2: Ø 32mm
3: Ø 38mm
4: Ø 50mm
l always use the largest possible adapter connection.
l the smaller connection pieces which are not required must be removed with a standard
metal saw. When cutting, make sure that the cross-section is not tapered by possible
plastic residues and that the fl ow of water is not obstructed.
Flexible hose
Panzerschlauch
30mA
ground fault
circuit interrupter*
30mA
FI-Sicherung*
Skimmer
Rubber buffers
Gummipuffer
Flexible hose
Panzerschlauch
Skimmer
Rubber buffers
Gummipuffer
POOL-STAR 1500 (230V)
POOL-STAR 2000 (230V)
POOL-STAR 1500 (380V)
POOL-STAR 2000 (380V)
POOL-STAR 3000 (380V)
1: Ø 38mm
2: Ø 50mm
3: Ø 64mm
6. serVICInG
It must be regularly checked the pump fi lter and clean if necessary. The service inter-
vals are based on the respective usage. We recommend a weekly Kontrole in much dirt
accumulation, if necessary daily inspection. Under normal pumping conditions the pump
requires no servicing. From an operating period (with clear water) of approx. 2000 hours
the mechanical components should be checked: impeller wheels, chambers, sealing
rings etc. on wear and if necessary be changed. After 3000 pumping hours the oil in
the chamber should also be changed, if necessary (only with oil-dipped engine types!).
Please, only fi ll it up to 80% and check the sealing rings always for density.
With abrasive materials like sand the servicing duration can become shorter.
The following controls should be carried out regularly:
l Intactness of the electric cable
l That the connection hoses are not bent or broken
l Cleanness of the pump medium
Moreover, the pump should be emptied with risk of frost, be washed out with clear water
and stored dry.
7. Guarantee reGulatIons
For all manufacturing and material defects, the statutory warranty applies. In these cases we
take the replacement or repair of the pump. Shipping costs shall be borne by our company,
except as required by law. Please report the warranty on our service platform http://www.profi -
pumpe.de/service.php. We will inform you how to proceed with case-related. Returns please
suffi cient postage. Unfortunately not prepaid returns can not be accepted because they are
fi ltered out before delivery. Our service we provide in Germany.
The warranty does not cover:
l Material wear (sealing rings, impeller wheels, impeller chambers)
l Unjustifi ed interventions or changes in the pump
l Damages by selffault
l Improper servicing and improper use
l DRY RUNNIG (Also partially!) of the pump
Moreover, we give no damage compensation for secondary damages!
8. seCurIty tIps
l Obey absolutely valid regulations on the electrical security
l Never run pump dry
l Pumping infl ammable, as well as all other aggressive liquids is prohibited
l Pay attention to the medium temperature max. 35°C
l Never pull the pump on the electrical cable or pressure hose
l Avoid cross section narrowing
l Pay attention to the given particle size
l During longer unused times, clean the pump, wash it out with clear water, dry and store it
at room temperature
l Test wells for enough fl owing water (dry run danger)
l The pump is to be secured through a RCD circuit breaker with a release current of 30 mA.
l The electrical connections are always to be carried out by an authorised professional
l The pump may be used by children aged 8 years and above as well as persons with reduced
physical, sensory or mental abilities or those who lack skills, experience and knowledge only if
they are supervised. These aforementioned persons should only use the appliance while adhe-
ring to safe instructions and resulting dangers.
l Cleaning and maintenance must not be carried out by children without supervision.
l Under certain cirumstances, it is possible that that contamination of water is caused by leakage.
English 5

Advertisement

loading