Backfire F5F Manual page 9

We give the barrier into the fuselage and set the servos´ neutrals. At the end of fuselage
we screw the next boll cups. It is absolutely necessary that the pulls are put through the
guide tubule in the middle of the fuselage!!!
We apply the epoxide with microballons thickened by aerosil on the barrier in the way
that the mixture do not slump. We inset the barrier into the fuselage inchmeal and turn the
fuselage upside-down. On the other side we set the ball pivot of butterfly in the cup on the
carbonic pull. The butterfly-flap must be secured against the movement with help of
cellotape.
BackfireF5F
Picture 6: Putting in the servos and setting up the neutrals
Page 9