Advertisement
1.3.5 Receiver batteries
Intellect AAA-750 mAh
X Cell
AAA-1000mAh
GP
A-1100 mAh
2 Fuselage
2.1 Cooling hole
First we mark the place of the cooling air´s entrance with the felt tip and we cut through
the carbonic fuselage by using a knife. We press down the cut cooling entrance under the
fuselage level and we fix it with help of balsa – 2mm of thickness. We apply an epoxid with
microballons on the side rim of the cooling entrance and we leave the fuselage to hardend.
BackfireF5F
A-1400 mAh
A-1300mAh
Picture 2: The cooling air´s entrance
Page 5
Advertisement
