Audio Visual Furniture PM-XFL-LIFT Assembly And Mounting Instructions

Note: Keep your original packaging until assembly is complete.
Two persons are required to attach display to this mount.
If you cannot understand these instructions or are concerned about safety of the
installation. Contact a qualified contractor or contact AVFI at 1-877-834-3876.

Supplied Parts:

Hardware Bag

WARNINGS:

1. Lower to bottom position before moving.
2. Always have 2 Adults move the stand.
3. Do not exceed a 10 degree slope
4. Always travel width wise for stability (shown)
5. Lock brakes at all times other than moving.
6. For indoor use only
7. Do not leave unattended around children.
8. Do not add additional weight or items to the
lift or TV without approval from VFI .
288 Don Hillock Drive, Aurora Ontario L4G 0G9
Toll Free: 1-877-834-3876
PM-XFL-LIFT
Assembly and Mounting Instructions
Thank you for purchasing AVFI's adjustable height mobile stand.
This products is designed for free standing mounting of
single plasma/lcd display sized 52-90" or SMART interactive displays
weighing 265lbs or less. (Min 400x200mm VESA mounting pattern)
TV Bracket
(2)qty
5" Casters
(2) W brakes
(2) no brakes
Cut out and stick to TV Bezel.
AUDIO VISUAL FURNITURE INTERNATIONAL
Tube
(1)qty
Fax: 905-751-1488 Local: 905-751-1459
Base
(1)qty
Lift Pillar
(1)qty
www.video-furn.com
Page 1
of 4