Printers - Texas Instruments TravelMate 2000 User Manual

Texas Instruments makes a variety of printers, any of which can be used with your TravelMate 2000. To
connect a parallel printer, use the supplied conversion adaptor between the parallel port and the TravelMate
2000 printer port. To use a serial printer, connect the printer to the serial port on the left side of the
TravelMate 2000 case.
Note: When the conversion adaptor is in use, the dust cap removed from the main unit can be put into the
slot on the conversion adaptor for storage. Always replace the dust cap when the conversion adaptor is not
in use.
To connect a serial printer, select the hardware installation screen and set the Serial I/O
field appropriately. Then connect the serial printer to the serial port on the left side panel of the TravelMate
2000 case.

Printers

TravelMate 2000 Options 6-25