How To Utilize This Installation Procedure - Canon Inner Finisher-D1 Installation Procedures Manual

How to Utilize This Installation Procedure

When Using the parts included in the package
A symbol is described on the illustration in the case of using the parts included in the package
of this product.
Packaged Item
Symbols in the Illustration
The frequently-performed operations are described with symbols in this procedure.
Screw Connector
Tighten Remove Connect
Claw
Insert Remove Push
Checking instruction
Check Visual Check Sound Check
Harness
Disconnect Secure Free
Plug in Turn on
Confirmation Before the Installation
Cautions at the Installation
1. Check that the main power switch is OFF.
1) Turn OFF the main power switch of the host machine.
2) Be sure that Control Panel Display and Main Power Lamp are both turned OFF, and then
disconnect the power plug.
NOTE:
• When installing the Additional Tray-A1 at the same time, install it in the inner finisher
prior to the installation of the Inner Finisher-D1. For the additional tray installation, refer
to the installation procedure contained in the Additional Tray-A1 carton.
• When installing the USB Device Port-D1 at the same time, install it in the host machine
prior to the installation of the Inner Finisher-D1. For the USB device port, refer to the
installation procedure contained in the USB Device Port-D1 carton.
2
1
2
F-1-2
2