Texas Instruments TM5000 Series User Manual page 105

No boot device
available - press F1
to retry boot
No boot sector on
fixed disk - Press F1
to retry boot
c
Non-System disk or
disk error. Replace
and press any key
when ready
Time-of-day not set
Startup Error Messages
Press F1 to try loading
Replace the floppy if you are loading
MS-DOS
Press Ctrl-Alt-Esc to ensure that the
drive type is set correctly in Setup.
Press F1 to try loading
hard disk again.
Load
display a directory of drive C. If you
cannot display a directory, the hard disk
may need to be reformatted.
Caution: Reformatting erases all of the
data on the hard disk. Reformat your
hard disk only as a last resort.
Eject floppy from floppy drive, and press
a key to load
Insert a floppy containing
floppy drive, and press a key.
Press Ctrl-Alt-Esc to ensure that the
drive type is set correctly in Setup.
The battery sustaining the system
configuration has failed. Follow the
procedure in this chapter to restore the
configuration.
from a floppy.
from a floppy, and try to
MS-DOS
MS-DOS
again.
MS-DOS
from the
MS-DOS
from the hard disk.
in the
MS-DOS
7-5