Cleaning The Lint Filter; Caution On Freezing During Winter - LG TG2402NTWV Owner's Manual

Cleaning the Lint Filter

The filter is an important part for efficient
washing performance result, so it needs special
care from you. It is recommended that the filter
be cleaned regularly.
1
Pull the cap of the lint filter.
2
Open the cap and remove lint and then
wash out.
3
Insert the lower part of the filter into the
drum and close the cap until you hear a
click sound.
NOTE
• When the lint filter is damaged, contact LG
service centre.
• Do not operate the washing machine without
the lint filter.
• Do not place the lint filter loosely. Doing so
may damage the fabrics or the washing
machine.
Caution on Freezing During
Winter
• When frozen, the product does not operate
normally. Make sure to install the product
where it will not freeze during winter.
• In case the product must be installed outside
on a porch or in other outdoor conditions,
make sure to check the following.
How to Keep the Product from
Freezing
• After closing the tap, disconnect the cold
supply hose from the tap, and remove water
while keeping the hose facing downwards.
Supply hose
EN
33