Table of Contents
Advertisement
3.3 Sealing the Rear of the Device
To be IP55 compliant the monitor requires to be water resistant
Figure 14: Reverse side placement of all around seal
1. Install seal between the front cover and mounting location for use in areas requiring an IP55 rating.
2. Glue fix 2x10mm sealing tape around the entire back edge, see
3.4 Display Module
This chapter explains the values of the various parameters of the monitor.
Parameter
Model
Size
Resolution / pixel aperture
Viewing angle (h/v)
Contrast
Colors
Brightness
Backlight
32 | Specifications
Values
Active Matrix TFT-LCD
46.0" / 116.8 cm
1920 x 1080 / 0.4845 mm²
178 ° /178 °
4,000:1 (type)
1073.7 million
700 cd/m² (type)
LED (Edge-Light)
Advertisement
Table of Contents
