Gardenline GLGS-1200 The Power Manual page 10

• Switch off the machine, remove the plug from the socket and
wait until the cutter blade has stopped turning before cleaning
the machine or carrying out maintenance.
• Take care when cleaning or maintaining the machine. Take
care not to cut your fingers, and wear protective gloves!
• Do not move or alter any of the electrical or mechanical
safeguards.
• Use the machine solely when there is sufficient daylight or
artificial light.
• Wear suitable work clothing and sturdy shoes.
• Make sure that the area where the lawnmower is to be used is
clean. Whilst you are using the lawnmower also check for any
objects that could damage the machine.
• If an object nevertheless comes into contact with the machine,
then stop and check whether the machine is damaged. Have
any damage repaired before you use the machine again.
• Switch off the machine immediately if it suddenly begins to
vibrate. Inspect the machine to determine the cause.
• Check the machine thoroughly before use. Only use the
machine when it is in good condition. Do not use the machine
if you observe a defect; have it repaired before you use it
again.
• Replace any worn or damaged parts. Always use original
(spare) parts.
Electricity
• Before inserting the plug in the socket verify that the
information on the socket is correct, and that it is in
agreement with the information indicated on the machine.
• When the use of a residual current circuit breaker is
mandatory verify that the circuit breaker that is used will trip
with a residual current of 30 mA. Consult an electrician.
• Never run the machine over the power cord. Make sure that
you always know where the power cord is lying on the ground.
• Use the special cable-holder to connect the plug to the
extension cable.
• Never use the machine in the rain, or on wet or damp grass.
Never leave the machine outdoors.
• Check that the power cord is in good condition before you use
the machine.
UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: GLGS-1200
10