Safety Device; Maintenance; Technical Characteristics; Troubleshooting - DeLonghi TRD Series Manual

In case of problems, the display will show an alarm message:
(Probe Failure)
With this alarm the appliance does not
operate. Contact the De'Longhi Customer
Service.
(High temperature)
When the product's internal temperature
is too high, the heating power will
progressively and automatically be
reduced. The display shows
seconds, cycling. To remove the cause
of this alarm check that the unit is not
covered or obstructed.

SAFETY DEVICE

A safety device switches the heater off in the event of
overheating. To restart the heater, call the De'Longhi
Customer Service.

MAINTENANCE

Always remove the plug from the power outlet and allow the
radiator to cool. Wipe radiator with a soft damp cloth, do not
use detergents and abrasives. Should the radiator not be in
use over a certain length of time, wind the cord around the
cord holder and store it in a dry place. This appliance has been
built to give many years of trouble free service.
In case of malfunction or doubt, do not try to repair the heater
by yourself: this may result in a fire hazard or electric shock.
Call the De'Longhi Customer Service (see attached list of
De'Longhi Customer Service).

TECHNICAL CHARACTERISTICS

Power supply
Absorbed power

TROUBLESHOOTING

PROBLEM
The appliance doesn't work
for two
See rating plate
"
CAUSE
- Be sure it is plugged in and that the
electrical outlet is working.
- Check for any obstruction.
- The temperature may be set too low.
- Plug into the power outlet.
- Remove the obstruction and let the
appliance cool down. If the appliance
doesn't work please contact the
De'Longhi Customer Service.
- Set the temperature to a higher position.
11
SOLUTION