ABB FENA-01 Quick Installation And Start-Up Manual page 2

2
Start-up
When the module is connected to the drive, the drive control program sets the applicable parameters. See
the appropriate drive firmware manual.
Basic parameter settings

Index Name
20.01 Ext1 commands
22.11 Speed ref1 source
28.11 Frequency ref1 source
50.01 FBA A enable
50.02 FBA A comm loss func
Protocol-specific parameter settings

PROFINET IO
Index Name
51.02 Protocol/Profile
51.04 IP configuration
51.05...08 IP address
51.09 Subnet CIDR
52.01 FBA A data in1
52.02 FBA A data in2
53.01 FBA A data out1
53.02 FBA A data out2
To take the settings into use, validate and refresh the parameters with parameter 51.27 FBA par refresh.
Connectivity configuration

To access the configuration web page:
1. Open a web browser and type the IP address of the adapter module in the address field.
2. Log in with a user name (admin) and a password (The last six digits of the MAC address of the adapter
module, in upper case letters, without hyphens. Eg, if MAC ID is 00-1C-01-00-2F-73, the password is
002F73).
Further information
See the latest version of FENA-01/-
11/-21 Ethernet adapter module user's
manual (3AUA0000093568 [English])
in ABB library
www.abb.com/drives/documents
abb.com/drives
© Copyright 2019 ABB. All rights reserved.
Specifications subject to change without notice.
Value
Fieldbus A
FBA A ref 1
FBA A ref 1
Enable (or select the option slot in which the module is installed).
This activates the communication module. The HOST LED becomes green.
Fault
Value
PNIO ABB Pro
Static IP
0.0.0.0
0
SW 16bit
Act 16bit
CW 16bit
Ref1 16bit
FENA-01/-11/-21
manual
For more information on ABB fieldbus
options and protocols, see the field-
bus communications web page
new.abb.com/drives/connectivity/field-
bus-connectivity
Ethernet/IP
Index Name
51.02 Protocol/Profile
51.04 IP configuration
51.05...08 IP address
51.09 Subnet CIDR
51.23 Speed scale
Modbus/TCP
Index Name
51.02 Protocol/Profile
51.04 IP configuration
51.05...08 IP address
51.09 Subnet CIDR
Value
EIP AC/DC
Set the IP address
according your network
configuration.
128
Value
Modbus/TCP
Set the IP address
according your network
configuration.
Fieldbus communications