Table of Contents
Advertisement
ASRock Utility Control Switch
SW1
On
Off
SW2
SW3
Off
On
Off
On
SW4: no function
Card Fan Switch
Use this switch to control the card fan speed.
Off: Full (The fan runs at full speed)
ON: Half (The fan runs at half speed, with a half voltage supply)
Graphics 12V Power Connector
This card provides a 6-pin graphics 12V power connector. Install the PSU's
power cable to this connector when more than two M.2 cards* are installed.
*Intel Optane SSD 900P or other M.2 card with higher power consumption
14
Utility control
Disabled
Enabled
CARD number
Off
CARD 1
Off
CARD 2
On
CARD 3
On
CARD 4
Hide quick links:
Advertisement
Table of Contents
