LG Multi V Series Owner's Manual page 10

Operating Instructions
Forced Operation
Operation procedures when the remote control can't be
used.
Press the tact switch (forced operation) for 2 seconds.
If you want to stop operation, press again the tact switch.
In case the power comes on again after power failure on
the forced operation mode, the operating conditions are
automatically set as follows:
During forced operation, the initial mode continues.
Operating mode
Indoor fan Speed
Setting temperature
Auto Restart Function
In case the power comes on again after a power failure, auto restarting operation is the function to operate proce-
dures automatically to the previous operating conditions.
Tips for Filter Sign LED (Grille Type)
1. Filter sign lamp (LED) is on.
2. If LED indicating filter sign lamp is on, clean the filter.
3. After cleaning the filter, press the timer button and ◀ button of wired remote controller at the same time for 3 sec-
onds. Then filter sign LED is off.
10 Indoor Unit
Cooling model
Cooling
High
22°C
Heat pump model
Room temperature ≥
set temperature -2°C
Cooling
Set available
Set available
ON/OFF
button
Room temperature <
set temperature -2°C
Heating
Set available
Set available