There are two ways to insert the M8 T-Nuts into the respective profile groove; refer to Figure 1 This guide is meant to help you assemble your Sim Rig as smoothly as possible. If you still and 2 respectively. have questions about the assembly process, please contact info@monstertech.de or support@ monstertechusa.com. 1.1 Before you start...
Page 3
MTX HOTAS INSTRUCTION MANUAL MTX HOTAS INSTRUCTION MANUAL 1.1.3 Universal Fastener Assembly 1.1.4 Angle Bracket Stud Removal The universal fastener assembly can be prepared the following way, so long as the T-Nut can Sometimes it might be necessary to break off the studs from angle brackets (if those are part be slid in from the side.
Page 4
HOTAS - Overview Figure 5: Angle bracket assembly 1.1.6 Adjustment of Profile Feet The profile feet are installed on the MTX HOTAS or MTX Stand-Alone TV Figure 6: Profile feet Figure 8: Use the above image as reference for the following assembly inst-...
Nur für Kinder ab 12 Jahren und Erwachsene Only suitable for children over 12 years and adults. Alle MONSTERTECH Produkte sind handgefertigt und All MONSTERTECH products are handmade and quality qualitätsgeprüft. checked. Das Rennsitzgestell ist zur Verwendung in Kombination mit...
Need help?
Do you have a question about the MTX HOTAS and is the answer not in the manual?
Questions and answers