1. Manuals
  2. Brands
  3. DIGITAL YACHT Manuals
  4. Server
  5. NAVLINK2
  6. Installation and operation manual

DIGITAL YACHT NAVLINK2 Installation And Operation Manual

Wireless nmea2000 server
Hide thumbs Also See for NAVLINK2:
Table of Contents

Advertisement

Quick Links

Download this manual
NAVLINK2 WIRELESS
NMEA2000 SERVER
Version 1.00

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NAVLINK2 and is the answer not in the manual?

Questions and answers

Related Manuals for DIGITAL YACHT NAVLINK2

Summary of Contents for DIGITAL YACHT NAVLINK2

  • Page 1 NAVLINK2 WIRELESS NMEA2000 SERVER Version 1.00...

  • Page 2: Before You Start

    Spare/suitable connection to the NMEA2000 network • M3 or M4 screws or other fixings appropriate to the mounting location (not supplied). To receive/display wireless data from the NavLink2 you will need: • Suitable navigation software running on a PC, iPhone/iPad, Mac or other wireless device.
  • Page 3 3. Installation The NavLink2 is IP54 rated (water resistant) and should be installed below deck in a dry location. When locating the unit you should consider: • Routing of the NMEA 2000 cable to the network. • Sufficient space around the unit for cable connections.
  • Page 4 Installation Step 3 – Powering NavLink2 • Apply power to the NMEA 2000 network and the NavLink2 the LEDs should start to illuminate or flash, as per the following table… STATUS DATA IN ERROR DATA OUT LINK Condition (Green) (Yellow)

  • Page 5: Normal Operation

    UDP connection and setup the connection. • Consult the help documentation for your App to see how wireless data connections should be configured. • The IP address and port that the NavLink2 transmits data on are; IP Address 192.168.1.1 Port 2000 •...
  • Page 6 Reset button for 1-2 seconds and try connecting again. In busy marinas with high levels of wireless activity, getting a reliable connection to the NavLink2 may be difficult, but once underway (at sea) a strong and reliable connection will be achieved.
  • Page 7 NavLink2 will reboot and you will need to reconnect wirelessly to it. If you make a mistake with a setting or forget a password, reset the NavLink2 to factory defaults by pressing and holding the Reset button for 10 secs or more.

Table of Contents