Operation Instructions; Setting The Clock; Setting The Kitchen Timer; Quick Start - Hisense H43MOMMI Owner's Manual

 When the oven first plugged in, the display will show "12:00".
 In the process of cooking set, broke about 20 seconds the oven will return to standby mode.
 After ending cooking, five beeps will sound and the oven will return standby mode.
 During cooking, if press STOP/CLEAR pad once, the program will be paused, but if you press
STOP/CLEAR twice, the program will be cancelled.
 In standby mode, press the "
version date and the model of PCB.

Setting the Clock

This is a 12 or 24 hour clock. You can choose to set the clock time in 12 or 24 hour cycle by pressing the
CLOCK button in standby mode.
In standby mode, press CLOCK pad once or twice to choose 12 hour or 24 hour clock.
Use the number pads to enter the correct time.
Press CLOCK or START pad once to confirm.
NOTE: During cooking, you can check the current time of the clock by touching CLOCK pad.

Setting the Kitchen Timer

1. In standby state or during cooking, touch KITCHEN TIMER pad once.
2. Use the number pads to enter desired time. The longest time you can set is 99 minutes 99 seconds.
3. Touch START pad to confirm.
NOTE: During countdown process, the timer time can be seen by touching KITCHEN TIMER pad, and
then press STOP/CLEAR pad when the display shows the time can cancel the program.

Quick Start

Use this feature to program the oven to microwave food at 100% power conveniently.
In standby mode, press QUICK +30 button once. The oven will start working automatically.
NOTE: During quick start cooking and microwave cooking, you can also add the cooking time by pressing
QUICK +30 pad (each press for 30 seconds, and up to 99 minutes and 30 seconds).

Microwave Cooking

1. In standby mode, press POWER LEVEL pad a number of times to select cooking power level.
2. Use the number pads to set a cooking time. The longest cooking time is 99 minutes and 99 seconds.
3. Touch START to start cooking.
Press POWER LEVEL pad to set a cooking power level:
Touch POWER LEVEL button
Once
Twice
3 times
4 times
5 times

Operation Instructions

" pad and "STOP/CLEAR" buttons at the same time to check the
Power(Display)
100%(P100)
90%(P-90)
80%(P-80)
70%(P-70)
60%(P-60)
Touch POWER LEVEL button
6 times
7 times
8 times
9 times
10 times
8
Power(Display)
50%(P-50)
40%(P-40)
30%(P-30)
20%(P-20)
10%(P-10)